TECH RESOURCES
Be Kind - - Be a Team Player - - Own It
MM Vacuum Care
`
- After cleaning every home:
- Check the roller brush.
- Cut off any excess hairs, strings that are stuck.
- Wipe the bottom cover of the vacuum with sanitizing spray.
- Wipe the top cover of the vacuum with sanitizing spray.
- Do not let the bag get filled up to the top, change the bag once it is over 3/4 of its capacity.
PROBLEM SOLVING
| Problem | Cause | Solution |
| Motor will not start | Electric plug
Power switch not turned “ON” |
• Push plug securely into outlet • Try another outlet • Check circuit breaker• Make sure power switch is “ON” |
| No suction at end of hose | Full paper bag Paper bag clogged Hose clogged Front cover not latched |
• Replace paper bag • Replace paper bag • Remove any clogs from hose that restrict airflow, then try again Push front cover until it latches firmly |
| Reduced suction | Full paper bag Slip ring open Hose clogged |
• Replace paper bag • Rotate slip ring on wand until hole is covered • Remove any clogs from hose that restrict airflow, then try again |
| Vacuum shuts off | Internal safety thermostat trips (see page 4 for details) |
• Unplug cleaner and check for obstructions in hose, wands and attachments • Check for full paper bag • Clean/replace motor filter |